Email: [email protected]
NITRO FUZER WELDERS:
Polyvance's Nitro Fuzer nitrogen plastic wleders are the most advanced and fully-featured on the market. Each welder comes with everything you need to quickly start making the fastest and strongest plastic repairs on virtually any type of plastic.
The Nitro Fuzer line of welders offers an option to every shop and every budget, from the basic 6085 model to the top-of-the-line 6080-CG, with its own nitrogen generator. Welding with nitrogen gas creates the strongest welds possible, because it eliminates oxidation of the plastic during the welding process. Think of it like TIG welding for plastic; there's no oxidation, no burning and no weld contamination.
* Faster cycle time - improve cycle time by up to 2 days
* Higher gross profit - labour dollars keep profit in shop
* Lower severity - increase profit while reducing the overall repair cost
6085: NITRO FUZER NITROGEN PLASTIC WELDING SYSTEM
6085-C: NITRO FUZER NITROGEN PLASTIC WELDING SYSTEM WITH CART
6080-CG: NITROCELL NITROGEN WELDING SYSTEM
Hot Air Replacement Parts
(for the above Machines)
6050-NR1: HOT AIR ALL PURPOSE TIP
6062ME: HOT AIR ELEMENT - 550 WATT
6100HW: HOSE & WIRING ASSEMBLY
For 6053 and earlier Hot Air Welders
This hose and wiring assembly features an improved, melt-proof, silicone hose that replaces the older, blue vinyl hose that was prone to get accidentally melted.
6101: HOSE AND WIRING ASSEMBLY
For 6057 through 6085 Hot Air Welders
This hose and wiring assembly features an improved, melt-proof, silicone hose that replaces the older, blue vinyl hose that was prone to get melted accidentally.
6150H: HOT AIR WELDER AND NITROGEN WELDER HANDLE
Handle with threaded insert. This does not include the socket that goes inside the handle. This is the handle ONLY!
6175-01: STAINLESS STEEL BARREL FOR HOT AIR WELDER
stainless steel barrel used on our hot air and nitrogen plastic welders.
6175-02: BRASS NUT FOR HOT AIR WELDER BARREL
Replacement brass nut for hot air plastic welder.
5700HT: Mini-Weld Model 7 Airless Plastic Welder
The Mini-Weld Model 7 Airless Plastic Welder is the next generation in plastic welding technology. The temperature control can be taken out of the carrying case for more mobility. It even has a belt clip attached. The Mini-Weld Model 7 Airless Plastic Welder is a complete kit that you can use to repair all kinds of plastic. This welder is NOT some stripped down kit. It's a complete, ready-to-use kit that is jam packed with benefits. Things like an easy-to-understand instructional video lets you learn how to weld in no time. You will be able to weld high-melting-point plastics (like nylon radiator tanks) quickly and easily with the 200 watt ceramic core element. With seven types of standard welding rod, you will be able to match virtually any type of automotive plastic. Problem plastics like TEO, TPO, and Polypropylene are no problem to repair with the included FiberFlex universal rod. The kit also includes two different, easy-to-swap welder tips for applying all of the included welding rod. Finally, the temperature control box allows you to dial in the perfect temperature for welding whatever type of plastic you are working on.
Airless Replacement Elements
(for the Model 7 Airless Plastic Welder)
6012: REPLACEMENT ELEMENT ASSEMBLY FOR MODEL 7 AIRLESS PLASTIC WELDER
This is the replacement element for the Mini-Weld Model 7 Airless Plastic Welder. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes.
6012-P: CERAMIC ELEMENT WITH US PLUG, 120V, 200W
This is ceramic element assembly that comes with the ATVPRO kit, the KCWPRO kit and other Airless Plastic Welders with a North American plug.
6012-C: CERAMIC CORE ASSEMBLY, 120V
This is the 120 volt ceramic heater core that is part of our 120 volt 6012 series of airless welding elements. These things rarely burn out. However, normally the ceramic will break if the airless welding element is dropped.
6027HT: STANDARD WELDING TIP
Standard plastic welding tip accepts 1/8th inch (3 mm) diameter plastic welding rods. This piece is cast brass with 12/24 threads.
6029: BIGFOOT TIP
The 6029 Bigfoot Tip has a foot that's 95% larger than our original tube tip for faster, easier welding! It has a 1/8th inch (3.2mm) hole to accept all of our "01 " profile (1/8 in. diameter) standard welding rods.
6030: FIBERFLEX SPEED WELDING TIP
The 6030 Speed Welding Tip is specially designed for use with our "02" profile 3/16th inch (4.7mm) diameter welding rods. These durable, cast brass tips thread directly into any of our airless welding elements.
6031: FLAT TEAR DROP SHAPED WELDING TIP
The 6031 welding tip fits the Model 3 through Model 7 plastic welders. It has a pointy tip to get into corners. It replaces the 6028RT welding tip.
6055: STEINEL LCD HOT AIR WELDER KIT
This hot-air plastic welder redefines the word easy. This high-tech heat gun is just loaded with benefits. Benefits like... A built-in blower eliminates the need for a separate air-compressor. With it's two-speed blower for better control of your weld. You can dial-in the perfect temperature with the temperature control dial. Take off the welding tip, and you have a really high-tech heat gun. The included speed tip lets you blast through your welds by guiding your welding rod into the proper position. It will stand up vertically so don't have to worry about burning-up your table. Digital indicator reveals the working temperature. Temperatures from 120F to 1,100F. Viariable airflow from 7 to 17.6 cfm. UL listed.
6203: HOT SPOT CORDLESS RECHARGABLE PLASTIC HOT STAPLER
Polyvance's cordless rechargable 6203 Hot Spot Plastic Stapler defines plastic reinforcement simplicity. Reinforcing plastics with the 6203 Hot Spot is quick, strong, and cost effective. The Hot Spot Stapler is perfect for holding broken tabs in position while making weld repairs. With our wide variety of specialty staples, you will be able to strengthen virtually any type of thermoplastic repair, from inside and outside corners to narrow mounting tabs.
6450: BUMPER BAG PLUS
Bumper Bag Plus is a versatile tool that works in many different areas of the body shop. Use it to take small dents out of plastic bumpers and sheet metal, adjust the fit of adjoining sheet metal panels, and even use it to cushion a jack saddle to eliminate the risk of damage to the subframe.
6146: BUMPER PLIERS KIT
Bumper Pliers Kit makes it easier for technicians to repair rectangular “slot tabs” and recessed holes often found on bumper covers. These bumper features are designed to clip into brackets on the quarter panels and hold the bumper tightly in place. The tabs are weak and often break when removing the bumper. The Bumper Pliers Kit helps technicians repair these problem areas.
6145: HAND SEAMER, 2"
This hand seamer is a great tool to have when creating tabs using the hot air welder. It helps to flatten out the melted plastic and cause it to "burn in" better to the existing plastic. Not only that, but it acts like a big heat sink to cool the plastic so that you can start grinding and sanding almost immediately.
6500VT: VARIABLE TEMP. HEAT GUN
The gun is designed for the long haul. It's lightweight... only 2-1/2 lbs. (That's over 30% lighter than most conventional models.) You also get and adjustable air intake regulator for variable temperature adjustment. The double jacketed nozzle and shield helps maintain cool exterior temperatures. With it's 3 position fingertip switch... Hot - Cold - Off, you are less likely to burn-out the element. The 8 ft., three-wire, grounding-type cord gives you plenty of room to work.
2045-10: REINFORCING MESH
Reinforcing Wire Mesh is designed to be used with the Uni-Weld Ribbon and FiberFlex rod and can be used on any type of thermoplastic repair. We recommend that mesh be used when a tear goes to the edge of the plastic. It's made from stainless steel, so it's five times stronger than regular aluminum wire screen. You can also use the mesh to fabricate tabs, fill holes, and provide reinforcement in any thermoplastic (meltable plastic). Each sheet of mesh is 5 inches (12.7 cm) by 10 inches (25 cm) and there are 10 sheets per pack.
2045W: REINFORCING MESH
Reinforcing Wire Mesh is designed to be used with the Uni-Weld Ribbon and FiberFlex rod and can be used on any type of thermoplastic repair. We recommend that mesh be used when a tear goes to the edge of the plastic. It's made from stainless steel, so it's five times stronger than regular aluminum wire screen. You can also use the mesh to fabricate tabs, fill holes, and provide reinforcement in any thermoplastic (meltable plastic). Each sheet of mesh is 5 inches (12.7 cm) by 10 inches (25 cm).
PLASTIC WELDING RODS:
KEN T800: KENWORTH T800 HOOD REPAIR KIT
Polyvance's "Kenworth T800 Hood Repair Kit" will allow you to repair the damaged horseshoe-shaped hood pockets on your Kenworth T800 for a fraction of the cost of replacing your damaged Kenworth T800 hood.
The "Kenworth T800 Hood Repair Kit" contains: