Walcom

GENESI CARBONIO 360

<- 9860 Genesi Carbonio 360 HVLP 9865 ->

• Body: forged aluminum and carbon fiber

• Air cap: new high atomization chemical nickel-plated brass, carbon fiber ring

• Needle-Spring: stainless steel

• Seal gaskets: self lubricating and adjustable PTFE (teflon)

• Weight: 12.7 oz

• Operating pressure: 26 psi - 32 psi

• Air consumption: 12.7 cfm

• Nozzle Ø: 1.2 - 1.3 - 1.4 - 1.5 - 1.7 - 1.9

<- 9760 Genesi Carbonio 360 HTE Base 9765 ->

• Body: forged aluminum and carbon fiber

• Air cap: new high atomization chemical nickel-plated brass, carbon fiber ring

• Needle-Spring: stainless steel

• Seal gaskets: self lubricating and adjustable PTFE (teflon)

• Weight: 12.7 oz

• Operating pressure: 26 psi - 32 psi

• Air consumption: 12.4 cfm

• Nozzle Ø: 0.8 - 1.0 - 1.2 - 1.3 - 1.4 - 1.7 - 1.9

<- 9960 Genesi Carbonio 360 GEO 9965 ->

• Body: forged aluminum and carbon fiber

• Air cap: new high atomization chemical nickel-plated brass, carbon fiber ring

• Needle-Spring: stainless steel

• Seal gaskets: self lubricating and adjustable PTFE (teflon)

• Weight: 12.7 oz

• Operating pressure: 26 psi - 29 psi

• Air consumption: 15 cfm

• Nozzle Ø: 1.0 - 1.2 - 1.3 - 1.4 - 1.5 - 1.7 - 1.9

<- 9660 Genesi Carbonio 360 HTE Base 9665 ->

• Body: Forged aluminum and carbon fiber

• Air cap: new high atomization chemical nickel-plated brass, carbon fiber ring

• Needle-Spring: stainless steel

• Seal gaskets: self lubricating and adjustable PTFE (teflon)

• Weight: 12.7 oz

• Operating pressure: 26 psi - 32 psi

• Air consumption: 12.4 cfm

• Nozzle Ø: 1.1 - 1.2 - 1.3 - 1.4 - 1.7 - 1.9

THERMODRY TECHNOLOGY

ThJ/R: 60150

Continuous flow drying gun 70°C for basecoat, equipped with air regulator.

15.7 - 19.6 in blow distance in the first phase; 7.8 - 11.8 in in final drying.

• Body: metallic, lined with a heatproof membrane

• Nozzle: nylon and rubber radial

• Air consumption: 9.3 cfm to 43.5 psi

• Weight: 10.5 oz

Ecodry light: 60143

• Central body:nylon

• Blow distance: 16-19.6 in - from the surface, continuously moving the gun

• Blowing time: follow the instructions provided by the paint manufacturer

• Equipped with intlet air flow regulator

• Adjustable air flow

• Working pressure: 7-29 psi

• Air consumption: 7 - 10.6 cfm

• Package: 1 pcs

• Weight: 11 oz

Painting Accessories

Digital gauge and air control unit: 90180/W

Pressure regulator (high flow) carbon fiber housing, quick disconnector, safe for spray gun washer after removing the digital monitor included. It has to be mounted at the spray gun inlet.

• Air inlet 1/4”

• Package: 1 pcs

• Weight: 4.5 oz

Air control unit: 90182/W

Pressure regulator (high flow) carbon fiber housing, quick disconnector, safe for spray gun washer after removing the digital monitor (not included) . It has to be mounted at the spray gun inlet .

• Air inlet 1/4”

• Package: 1 pcs

• Weight: 3 oz

Digital monitor: 90181/W

Digital screen, carbon fiber housing, quick disconnector, replaceable battery (3V watch type).

• Package: 1 pcs

• Weight: 1.45 oz

TOP air regulator: 90147/W

High flow and precision regulator with glass pressure gauge and metallic case to be applied to the spray gun air inlet.

• Body: CNC processed anodised aluminium

• Pressure gauge: scale 0 - 10 bar

• Air inlet: 1/4” U compatible with various standard 1/4”

• Package: 1 pcs

• Weight: 5.2 oz

TOP regulator: 90148/W

High flow and precision regulator to be applied to the spray gun air inlet.

• Body: CNC processed anodised aluminum

• Air inlet: 1/4” U compatible with various standard 1/4”

• Package: 1 pcs

• Weight: 3.3 oz

Regulator: 90105/W

Air flow regulator with glass pressure gauge and metallic case to be applied to the spray gun air inlet

• Pressure gauge: scale 0 - 145 psi

• Air inlet: 1/4” U compatible with various standard 1/4”

• Package: 1 pcs

• Weight: 5.3 oz

Regulator: 90106/W

Air flow regulator to be applied to the spray gun air inlet

• Air inlet: 1/4” U compatible with various standard 1/4”

• Package: 1 pcs

• Weight: 2.6 oz

Manometer: 61306

Spare manometer for air flow regulator

• Connection: M 1/8”

• Diameter: 1.6 in

• Working pressure: 0 - 145 psi

• Package: 1 pcs

• Weight: 2.4 oz

Manometer: 61302

Spare manometer for air flow regulator, Double pressure gauge scale

• Rear connection - M 1/8”

• Diameter 1.9 in

• Working pressure: 0 - 174 Psi

• Package: 4 pcs

• Weight: 12 oz

• Package: 10 pcs

• Weight: 0.4 oz

Manometer protector:

from 1.5 to 1.6 in: 90128

from 2.5 in: 90129

Transparent shockproof and paint-proof pressure gauge guard, washable with solvent

• Package: 10 pcs

• Weight: 0.4 oz

FILTERS

FSRD 4: 60138/11

A modular filter system ideal for use in the painting booth.

• Central body: anodized aluminum

• Composition:

1) Pre-filtering element in synthetic fibre for the elimination of condensation. Automatic discharge

2) Oil-separating filter for the elimination of residual pollutants. Manual drainage tap.

3) Silica dryer group to reduce residual humidity in the compressed air. Nr. 3 saturation indicator lights.

4) Active carbon filter to eliminate all impurities and obtain breathable air. Max oil residue < 0.0003 mg/m3.

• Pressure adjuster: membrane system and automatic decompression

• Air inlet: F 1/2”; air outlet: n° 2 from M 1/4”

• Filtering power: air 5 μ - oil 0.01 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 512 oz

FSRD 3: 60123/11

A modular filter system ideal for use in the painting booth.

• Central body: anodized aluminum

• Composition:

1) Pre-filtering element in synthetic fibre for the elimination of condensation. Automatic discharge

2) Oil-separating filter for the elimination of residual pollutants. Manual drainage tap.

3) Silica dryer group to reduce residual humidity in the compressed air. Nr. 3 saturation indicator lights

4) Filtro per l’eliminazione di polveri generate dalla silice, capacità filtrante 5 μ.

• Pressure adjuster: membrane system and automatic decompression

• Air inlet: F 1/2”; air outlet: n° 2 from M 1/4”

• Filtering power: air 5 μ - oil 0.01 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 505 oz

FSRD 2: 60145/11

A modular filter system ideal for use in the painting booth.

• Central body: anodized aluminium

• Composition:

1) Pre-filtering element in sythentic fibre for the elimination of condensation. Automatic discharge.

2) Oil-separating filter for the elimination of residual pollutants.

Manual drainage tap.

3) Active carbon filter to eliminate all impurities and obtain breathable air. Max oil residue < 0.0003 mg/m3.

• Pressure adjuster: membrane system and automatic decompression

• Air inlet: F 1/2”; air outlet: n° 2 from M 1/4”

• Filtering power: air 5 μ - oil 0.01 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 282 oz

FSRD: 60121/11

Air treatment system excellent for use in car-body workshops and industry.

• Central body: anodized aluminium

• Composition:

1) Pre-filtering element in synthetic fibre for the elimanation of condensation. Automatic discharge.

2) Oil-separating filter for the elimination of residual pollutants.

Manual drainage tap.

• Pressure adjuster: membrane system and automatic decompression

• Air inlet: F 1/2”; air outlet: n° 2 from M 1/4”

• Filtering power: air 5 μ - oil 0.01 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 190.5 oz

FCA: 60139/11

Active carbon filter to eliminate all impurities and obtain breathable air,

max oil residue < 0.0003 mg/m3.

• Central body: anodized aluminium

• Air inlet: F 1/2”; air outlet: F 1/2”

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 106 oz

PFR: 60127/11

Filter unit for the elimination of condensation.

• Composition: Synthetic fibre pre-filtering element to eliminate condensation. Automatic drain.

• Central body: anodized aluminum

• Pressure adjuster: membrane system and automatic decompression

• Air inlet: F 1/2”; air outlet: n° 2 from M 1/4”

• Filtering power: air 5 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 152 oz

ESR: 60129/11

Silica drying unit, to eliminate residual humidity in compressed air, to be used in combination with an air pre-filtering group in a painting booth.

Provided with an indicator to show saturation of the silica which can be replaced or regenerated (4 hours at 135° C).

• Filter to eliminate dust generated by silica 5 μ.

• Central body: anodized aluminium

• Pressure adjuster: membrane system and automatic decompression

• Air inlet: F 3/4”; air outlet: n° 2 from M 1/4”

• Filtering power: air 5 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 405 oz

THERMODRY TECHNOLOGY

The new TD3 PRO and TD1 PRO multifunctional heat conditioner range is a unique and innovative compressed air conditioning system inside a paint booth that lets you work with heat regulated air and, for TD3 PRO, without any solid and gaseous impurities.

The Thermodry Technology line, equipped with the new and more powerful THT hose and rich range of accessories, now represents the top in terms of efficiency and reliability in the paint phase, based on 3 main functions:

• 1 - Air heating and thermoregulation: the TD3 PRO / TD1 PRO heating element, combined with the THT heated hose and internal J thermocouple, heat and regulate air to allow the operator to paint at constant temperature, regardless of the climate/room conditions.

Let’s not forget that air used in painting can even drop (due to air expansion) under 5°C. TD PRO can reach temperatures between 20 and 50°C during the paint phase, essential for water-based and VHS transparent paint application, and over 70°C for drying. Temperature which, once quickly reached, are kept constant during the entire work phase.

• 2 - Air filtering (TD3 PRO only): the full line of equipment filtering groups, water-oil-silica-active carbons, can achieve fully clean and breathable compressed air.

• 3 - Automatic dehumidifying mass regeneration (TD3 PRO only): once saturated with humidity, Silica gel requires regeneration. The TD3 PRO SRS system, due to the hot air flow inversion generated by the heating element, regenerates the entire humidifying mass in just 4 hours.

THERMODRY TECHNOLOGY: BENEFITS

Integral and efficient system use provides the following benefits:

1 up to 40% drying time savings over traditional systems;

2 the possibility of lowering paint booth temperature by at least 41°F over that recommended by paint manufacturers;

3 better paint layout;

4 higher application speed;

5 elimination of brilliancy loss;

6 reduction of spot risks;

7 “orange peel” effect reduction;

8 full elimination of solid and gaseous impurities;

9 breathable filtered air;

10 lowering of the dew point;

11 automatic and timed silica regeneration;

12 constant compressed air and hose temperature to fully guarantee system efficiency.

** Ref. /T= with 1 remote control

TD3 PRO: 60151**

Cabin booth integrared air conditioning and thermoregulation system.

• Central body: anodised aluminium

• Composition:

1) Synthetic fibre pre-filtering element that eliminates condensation.

Automatic drain with safety rod for manual drain.

2) De-greaser filter to eliminate residual pollutants. Manual drain.

3) Drying group with silica gel that reduces residual humidity in compressed air.

Possibility or silica gel regeneration with TD3 PRO hot air flow SRS valve. Silica gel lasts max 1 year.

4) Active carbon filter to eliminate all impurities and obtain breathable air. Max oil residue < 0.0003 mg/m3.

5) Heating element with 1.200 W power controlled by an electronic unit with PID retroactive system and SCR heating power regulation.

• Pressure regulator: membrane regulation and automatic decompression

• Air inlet: F 1/2”; air outlet: F 1/2”

• Filtering power: air 5 μ - oil 0.01 μ

• Working pressure: 175 psi

• Air consumption: 42.3 cfm to 87 psi

• Weight: 741 oz